Ddr4 1.2v So-dimm Slots
A-Tech 16GB DDR4 2400MHz SODIMM PC4-19200 2Rx8 Non-ECC CL17 1.2V 260-Pin SO-DIMM Laptop Notebook Computer RAM Memory Upgrade Module 4.8 out of 5 stars 181 $53.99 $ 53.
Ddr4 1.2v So-dimm Slots Free
UDOO BOLT features 2x 260-pin SO-DIMM sockets for DDR4 memory (CN2 and CN3).
- Finally, DDR3 memory is a bit shorter than DDR4 – 2.66 versus 2.74 inches. So, a DDR3 memory module won’t fit in a DDR4 slot And a DDR4 stick is incompatible with a DDR3 slot Besides the physical differences, DDR3 and DDR4 RAM differ in voltages. DDR3 uses a voltage of 1.5V (or 1.35V for DDR3L variant).
- There is no such thing as a fixed frequency RAM slot. You are only talking about a slot that was previously used by a RAM stick that worked at 2400MHz. You can use whatever frequency you want.
- Supports 4GB, 8GB and 16GB DDR4 SO-DIMMs up to maximum 32GB.
- Supports 1.2v DDR4-2400 SO-DIMM ECC and non-ECC memories with dual channel architecture.
In order to exploit the Dual-Channel mode make sure that you install memory modules of the same type and density in different channel DIMM slots.
If you want to use only 1 SO-DIMM module you can install it into either SO-DIMM slot CN2 or slot CN3.If you want to use 2 SO-DIMM modules you can install it into both the SO-DIMM slots CN2 and CN3.
Memory Modules Installation
Please only install DDR4 SO-DIMMs on UDOO BOLT. Only DDR4 are compatibles with UDOO BOLT, as there are physical differences between DDR3 and DDR4 memory modules. Check that all the notches line up with the DDR4 SO-DIMM slot to ensure you have the correct DIMM.
Follow these steps to install the RAM modules:
- Pull both clips on either side of the slot outwards. Align the RAM SO-DIMM module with the slot.
- Press the module straight down until the plastic clips tick and close. Ensure that the module fits tightly into the SO-DIMM slot. Push the clips inwards to check.
Ddr4 Dimm 16gb
MOdule removal from a socket: gently spread the socket’s retention arms to disengage them from the SO-DIMM module.
Heads up! Do not touch the RAM module contact edge to avoid damaging it.
Validated modules
Here you can find the RAM modules validated and tested with the UDOO BOLT, part of the family product Transcend DDR4-2400 SO-DIMM
- Transcend TS512MSH64V4H (RAM SO-DIMM Module 4GB (512Mx8 - 1Rx8) DDR4 1.2V PC4-2400 non-ECC - Lead Free)
- Transcend TS1GSH64V4B (RAM SO-DIMM Module 8GB (1024Mx8 - 1Rx8) DDR4 1.2V PC4-2400 non-ECC CL=17 - Lead Free)
- Transcend TS2GSH64V4B (RAM SO-DIMM Module 16GB (1024Mx8 - 2Rx8) DDR4 1.2V PC4-2400 non-ECC CL=17 - Lead Free)
Please always use SO-DIMM modules with the same technical specification.
Info In this thread of the UDOO Forum you can find an unofficial but useful discussion about others compatible memories: UDOO BOLT Memory Compatibility List